When you looking for resin uv 3d printer, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable resin uv 3d printer is not an easy task. In this post, we show you how to find the right resin uv 3d printer along with our top-rated reviews. Please check out our suggestions to find the best resin uv 3d printer for you.
Best resin uv 3d printer
1. Anycubic POT016 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/ 500G-Grey (Bottle Random)
FeatureSpecifically designed for led light source to achieve better printing quality
Rapid prototyping. The resin has been developed to reduce the forming time
Strong adhesion. The adhesion has been improved for higher print success rate
Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT016 and fine printing details
Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment
DescriptionNote: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)2) It is recommended to store the resin under 15C -35C in a sealed container. Avoid any dusty or moist environment. 2.Usage:1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to choose corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incorrect use of the resin.
2. ELEGOO 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 500Gram Translucent
FeatureLow Shrinkage and High PrecisionELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.
Fast Curing and Great StabilityELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.
Bright and Stunning Colors: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
Wide ApplicationsGiven the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD or SLA 3D printers. Works best with the LCD 3D Printers.
Safe and Secure PackagingLeak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong
DescriptionELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light. In the case of 3D printing , these are typically liquid plastic resins that harden when exposed to a light source, which works perfectly with our Photocuring resin
Usage condition :
1) Shake up the bottle before use and avoid direct sunlight and dusty environment
2) Do not drink it and keep it out of the reach of children
3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation
4) If you got skin contact please wash away with waters immediately and if you feel discomfort please see a doctor ASAP.
5) Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least
6)If you don't use the resin please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it.
Material Properties :
Curing wave-length: 405 nm
Hardness: 79.0 D
Shrinkage: 7.1 %
Viscosity (25): 552.0 mpa.s
Liquid density: 1.100 g/cm
Solid density: 1.184 g/cm
Tensile strength: 23.4 Mpa
Elongation at break: 14.2 %
Curing time: 6-10 s
Color option: Grey, White, Green, Black, Transparent, Yellow, Blue, Red
Shelf life: 1 year
3. Monoprice Rapid UV 3D Printer Resin | Compatible with All UV Resin Printers DLP, Laser, or LCD
FeatureLow Cost Low Fumes Safe for home use delivering ultra high accuracy and low shrinkage.
MP RapidUV resin provides value and consistency in your work. High Quality pigments provide stunning colors in our range of Resins and available colors (Black, White, Gray, Clear, Yellow, Red, Green, and Orange).
Compatible with all UV resin printers (DLP, Laser, or LCD), the formula has been optimized for low power LCD resin printers.
Cures at 405nm wavelength.
Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
DescriptionLow Cost Low Fumes Safe for home use delivering ultra high accuracy and low shrinkage. MP RapidUV resin provides value and consistency in your work. High Quality pigments provide stunning colors in our range of Resins and available colors (Black, White, Gray, Clear, Yellow, Red, Green, and Orange). Compatible with all UV resin printers (DLP, Laser, or LCD), the formula has been optimized for low power LCD resin printers. Cures at 405nm wavelength.
4. ELEGOO Mars UV Photocuring LCD 3D Printer with 3.5'' Smart Touch Color Screen Off-line Print 4.72"(L) x 2.68"(W) x 6.1"(H) Printing Size Black Version
FeatureFast Slicing SoftwareELEGOO Mars comes with the latest version of ChiTu Box Slicing Software which gives you extraordinary user experience. ChiTu Box takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
Resin saving and Better PrintingChiTu Box allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process. Equiped with 40W UV lights and using ELEGOO resin, you can get a better pritning result.
Smart and Convenient3.5'' inch color touch screen equipped with the latest ELEGOO ChiTu 5.0 system makes it very easy for off-line printing. The build platform with steel ball balancing structure inside allows you to start printing within 5 minutes after assembly.
High Precision and ResolutionELEGOO Mars uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm
Warranty and ServiceWe provide total one-year machine warranty (5.5'' inch 2K LCD and FEP film excluded) and if you have any questions regarding product operation or software please feel free to contact us
DescriptionIntroducing ELEGOO MARS LCD 3D Printer
ELEGOO has been manufacturing 3D printer components and parts since 2014 and with years of experience in 3D printing, we finally developed our own 3D printer using UV photocuring technology. We'd like to present you our very first photocuring LCD 3D Printer- ELEGOO Mars.
Great industrial design and user-friendly system, we make ELEGOO Mars suitable for anyone to use even though you have never used a 3D printer before.
The semi-assembled printer will save your time setting up when you receive it and within 5 minutes you could start printing your first model we provided - a Christmas deer, which could be easily sliced using our newly released ChiTu Box slicing software.
Work together with ELEGOO photopolymer resin, you would be amazed at how perfect your model turns out to be - high resolution and super performance in details.
Finish Kit includes:
MARS 3D PRINTER * 1
Build Platform * 1
Resin Tank * 1
U Disk * 1
Measuring Cup * 1
Mask * 1
Gloves * 1
Funnel * 10
Scraper * 1
FEP Release Liner * 1
UL Adapter 60W * 1
User Instruction * 1
5. Wanhao UV Cure 3D Printer Water Washable Resin (Clear)
DescriptionThis is resin made for the Wanhao Duplicator 7 and Duplicator 8. You can use this resin with any UV cure machine Works perfectly with DLP printers, UV lasers, and UV LEDs. Wash with water instead of alcohol.
6. ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation with 2.8'' Smart Touch Color Screen Off-line Print 4.53"(L) x 2.56"(W) x 6.1"(H) Printing Size
FeatureIntelligent: Colorful touch screen equipped with Photon system bring new function.You can pre-view the model in SD card like you saw pictires in Windows OS.Real-time display printing process function is available now.
Precision: 2K LCD masking screen. 2560*1440(2k)HD masking LCD gives very fine printring details down to few micrometers
Wide application: used in baby toys, garden tools, Medical application, dental application. For example, you can print denture.
Speed: Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.
Creative: Developped Resin Vat FEP film is part of maintenance cost in daliy printing. New resin vat was specilly designed for FEP film to adjust the tightness.
DescriptionWorry-free customer service from Anycubic Technology:
For any questions you could contact our salesman on Amazon to get full supports.
User tutorial video:
Operating SystemANYCUBIC Photon
Screen: 2.8-inch touch screen
Slicer software: ANYCUBIC Photon Slicer
Light-source: UV integrated lightwavelength 405nm
XY DPI: 47um2560*1440
Z axis resolution: 1.25um
Layer resolution: 25 ~ 100um
Printing speed: 20mm/h
Rated Power: 40W
Printer size: 220mm*200mm*400mm
Printing volume: 115mm *65mm *155mm (4.52*2.56*6.1)
Printing material: 405nm photosensitive resin
1.Avoid direct contact with skin when handling the resin. Flush with plenty of water if contact by accident.
2.Pour resin back from the vat to storage bottle if the printer will not be used for over 2 days.
3.Ensure there is no solid residuals from last print when start new print.
4.Use tissue to clean the vat when change resin.
5.The printed objects can be further hardened under sun-ray or UV-light source.
1* ANYCUBIC Photon 3D printer
1* Resin *250ml
1* USB memory
3* Rubber Gloves
1* Set of kits
1* Power cord
1* Power supply
1* Breathing Mask
7. UV Resin Curing Light for SLA 3D Printer/DLP 3D Printer solidify photosensitive Resin 405nm UV Resin with 60w Output Affect
Feature6W power but 60W power affect
easy to use
DescriptionThis UV LED light with 6 high power 405nm UV LED , can fast curing the 405nm UV resin printed objects, make the objects solid efficiently and use less time than usualy ways
Within 5 cm to the light, the resin can be cure within 10-15 seconds, but thicker parts need more time.
This light can be apply to DIY curing enclosue or use in handheld way .due to strong UV light output, please ware eye protection device when use this light.
The parcking list
1* UV light with Standard US adapter ( if EU area will with a plug swtich device )
Light Output . 6W power and 60W UV light affect
Power Input: AC 85V-264V, 50-60Hz 0.3A Max,Output: DC:10-27V 300mA+/-5%
Size: 115x87x76 mm or115x87x90mm( random delivery)
Applicant with to curing models made by Form1, form1+,form2, moai, etc printer use 405nm resin
8. Monocure 3D Rapid Resin for Low Power UV 3D Printers 1L Gray
FeatureMonocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and engineering parts.
All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.
Our resins have been tested with a 'Shore D Hardness Durometer' and have a rating of 70. (A hard hat has a rating of 80)
The Viscosity of our resin is 500 - 600cps @ 25C (Brookfield RVT).
All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>
DescriptionOur Rapid product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin. Gray is the perfect & highly recommended color for photographing your 3D prints. The solid grey appearance allows you to 3D print models or parts with a detailed smooth finish that will be grey in color when cured.
9. Monoprice Mini Deluxe SLA Resin UV 3D Printer With (120 x 70 x 200 mm) Build Area, Ultra High Resolution, LCD Touch Screen Display + Free 250ml Red Photopolymer Resin
FeatureFast Printing:This SLA printer can print up to 30mm/hour vertically, making it comparable in speed to ordinary FDM/FFF printers.
LCD Touchscreen:With features like the built-in LCD touchscreen interface, stand alone printing, and guided leveling, this 3D resin printer offers industry standard capabilities at a far lower cost.
Auto Support Generator:The software supplied with the MP Mini SLA 3D Printer has the ability to automatically generate any support elements needed. Simply import your 3D model and click a single button to generate all necessary supports.
Size Matters: vWith a layer height of 20 microns, this printer is able to produce 3D prints with details as fine as 1/5 the width of a human hair.
Ultra High Resolution:This SLA LCD printer is capable of the printing at the highest resolutions, up to 20 microns, where most competitors are limited to 50 microns. It can print with negative gaps (holes) as small as 30 microns, making it ideal for applications where the highest level of detail is required, such as jewelry and dental prototyping.
Projection Size - 5.5 inches LCD
DescriptionExpand your prototyping possibilities with ultra high resolution 3D printing. The MP mini Deluxe SLA LCD resin printer is a high resolution desktop machine that matches the print quality of large, industrial printers at a far lower cost. The MP mini Deluxe SLA uses stereo lithography (SLA) technology to achieve a professional print quality that plastic extrusion printers just can't match. Stereo lithography is the gold standard for accuracy and resolution in 3D printing. Ultra high resolution: this SLA LCD printer is capable of the printing at the highest resolutions, up to 20 microns, where most competitors are limited to 50 microns. It can print with negative gaps (holes) as small as 30 microns, making it ideal for applications where the highest level of detail is required, such as jewelry and dental prototyping. Fast printing: this SLA printer can print up to 30mm/hour vertically, making it comparable in speed to ordinary FDM/FFF printers. Lcd touchscreen: with features like the built-in LCD touchscreen interface, stand alone printing, and guided leveling, this 3D resin printer offers industry standard capabilities at a far lower cost. Auto support generator: the software supplied with the MP mini SLA 3D printer has the ability to automatically generate any support elements needed. Simply import your 3D 130994 and click a single button to generate all necessary supports. Size matters: with a layer height of 20 microns, this printer is able to produce 3D prints with details as fine as 1/5 the width of a human hair.
10. Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area
FeatureDESKTOP DESIGN: Only 6.6 pounds with a compact size of 170*275mm, Featuring a small footprint. Suitable for office, studio or home.
READY TO PRINT: Unlike most other 3D printers, fully assembled and has already been calibrated at the factory. You can start printing right out of the box!
OFFLINE PRINTING: Insert an SD card with a print file, press the print button and your design begins to take shape. Without connection problems. Easy to print.
Printing at 100 micrometer XY resolution and up to 20 micrometer Z layer thickness, SparkMaker has an amazing ability to print in higher resolution compared to DLP 3D printers.
WORRY-FREE WARRANTY: Unconditional return, if you have any question please feel free to contact us, we will reply your any product issue within 24 hours.
DescriptionHow to use Sparkmaker:
Step1:Add model to SparkStudio to add support and slice
Step2:Save the slice file to SD card.
Step3:Level platform when first print (No need to level again next time).
Step4:Loosen the four screws on both sides of the platform.
Step5:Rotate the knob drops the platform to the lowest point
Step6:Press down the platform and tighten the four screws on both sides of the platform.
Step7:Pour the resin into resin tank(Less than 120g resin)
Step8:Insert the SD card into the slot (Face down).
Step9:Press the button and start to print
Step10:The print is finished.
Step11:Loosen the handle and remove the platform
Step12:Remove the supports of model
Step13:Clean the model with 99% alcohol
Step14:Irradiate the model with UV-light about 2-3mins.purchased separately
Step15:Finally,get the model.
How to Clean the Machine?
The edge of the building platform can be cleaned using tissue or dust cloth and residual adhesive can be removed with a knife or spade and the residual adhesive in the tank should be removed with tweezers. The remaining resin can be absorbed using a syringe and stored in a bottle for next use. Loosen the two screws used to install resin tank and clean the tank with alcohol, and then reinstall it.
Matters needing attention:
1.When connecting the printer,You should plug in the DC port first,and then plug in the socket.
2.The SparkMaker 3D Printer should put in a place without strong light.
3.UV cover should be put on the SparkMaker Printer when printing.
4.The SD card's capacity should not more than 32G and should be formatting when first use.
5.Avoid looking at UV light and you should wear goggles.
KINDLY REFER USER MANUAL BEFORE USE.