Top 10 lever hoist 2 ton

If you looking for lever hoist 2 ton then you are right place. We are searching for the best lever hoist 2 ton on the market and analyze these products to provide you the best choice.

Best lever hoist 2 ton

Product Features Editor's score Go to site
TOHO HSH-616 OP Lever Block/Ratchet Puller Hoist with Overload Protection (3 Ton, 20 Foot Chain) TOHO HSH-616 OP Lever Block/Ratchet Puller Hoist with Overload Protection (3 Ton, 20 Foot Chain)
Go to amazon.com
TOHO HSH-616 Lever Block/Ratchet Puller Hoist (3 Ton, 20ft. Chain) TOHO HSH-616 Lever Block/Ratchet Puller Hoist (3 Ton, 20ft. Chain)
Go to amazon.com
VEVOR Chain Block 1.5T Ratchet Lever Block Chain Hoist Manual Lever Chain Hoist Come Along Chain Puller 10 Ft Lift (10ft) VEVOR Chain Block 1.5T Ratchet Lever Block Chain Hoist Manual Lever Chain Hoist Come Along Chain Puller 10 Ft Lift (10ft)
Go to amazon.com
Zorvo 1.5 Ton 3000lb Lift Lever Block Chain Hoist with Ratchet Lift 5 feet Chain Hoist Chain Hoist Lift Puller -Shipping from USA,3-7 Days Delivery Zorvo 1.5 Ton 3000lb Lift Lever Block Chain Hoist with Ratchet Lift 5 feet Chain Hoist Chain Hoist Lift Puller -Shipping from USA,3-7 Days Delivery
Go to amazon.com
Harrington LB Series Steel Lever Hoist, 9-19/32 Harrington LB Series Steel Lever Hoist, 9-19/32" Lever, 1 Ton Capacity, 15' Lift Height, 1.1" Opening, 11.8" Headroom
Go to amazon.com
Harrington LB Series Steel Lever Hoist, 10.4 Harrington LB Series Steel Lever Hoist, 10.4" Lever, 2 Ton Capacity, 15' Lift Height, 1.4" Opening, 14.8" Headroom
Go to amazon.com
Harrington LB Series Steel Lever Hoist, 9-19/32 Harrington LB Series Steel Lever Hoist, 9-19/32" Lever, 3/4 Ton Capacity, 15' Lift Height, 0.9" Opening, 11" Headroom
Go to amazon.com
Harrington LB Series Steel Lever Hoist, 10.4 Harrington LB Series Steel Lever Hoist, 10.4" Lever, 2 Ton Capacity, 5' Lift Height, 1.4" Opening, 14.8" Headroom
Go to amazon.com
TOHO HSH-616 OP Lever Block/Ratchet Puller Hoist with Overload Protection (1.5 Ton, 20 Foot Chain) TOHO HSH-616 OP Lever Block/Ratchet Puller Hoist with Overload Protection (1.5 Ton, 20 Foot Chain)
Go to amazon.com
Hd 2 Ton Ratcheting Lever Hoist Hand Puller Come Along 2 Hooks Cable Dual Gear Hd 2 Ton Ratcheting Lever Hoist Hand Puller Come Along 2 Hooks Cable Dual Gear
Go to amazon.com
Related posts:

1. TOHO HSH-616 OP Lever Block/Ratchet Puller Hoist with Overload Protection (3 Ton, 20 Foot Chain)

Feature

Comformity - ANSI B30.16, AS1418.2, EN13157 Warranty - Three Years
Test - Each piece pass proof load test at 150% of rated load.
Overload Protection-All the hoist are factory setted with overload protection system
Available in 3/4 Ton, 1.5 Ton and 3 Ton Capacity with 5ft, 10ft. and 20ft lift chain length
Safety - All the hoist has a 4:1 safety factor PLI available - Products liability insurance available for all the hoist

Description

HSH-616 Lever Block Hoist with German Technology features Overload protection and meets all international standards such as GS,CE,EN,ANSI,AS/NZS1418.2. All steel construction for external impact resistance. High-stringth, cold-forged, alloy steel contruction for lighter weight impact resistance with long life. 360 degree rotating handle with short stroke to ratchet loads. Durable powder coated finish to prevent corrosion. Reliable non-asbestos disk braking system to prevent accidents. Single-hand free chaining is simple and convenient, allowing smooth, trouble-free operation in the vertical or horizontal position Hardened steel rollers supporting the load run smoother and last longer than bearings.

2. TOHO HSH-616 Lever Block/Ratchet Puller Hoist (3 Ton, 20ft. Chain)

Feature

Comformity - ANSI B30.16, AS1418.2, EN13157 Warranty - Three Years
Test - Each piece pass proof load test at 150% of rated load.
Available in 3/4 Ton, 1.5 Ton and 3 Ton Capacity with 5ft, 10ft. and 20ft lift chain length
Safety - All the hoist has a 4:1 safety factor PLI available
Products liability insurance available for all the hoist

Description

HSH-616 Lever Block Hoist with German design. Meets all international standards such as GS,CE,EN,ANSI,AS/NZS1418.2. All steel construction for external impact resistance. High-strength, cold-forged, alloy steel construction for lighter weight impact resistance with long life. 360 degree rotating handle with short stroke to ratchet loads. Durable powder coated finish to prevent corrosion. Reliable non-asbestos disk braking system to prevent accidents. Single-hand free chaining is simple and convenient, allowing smooth, trouble-free operation in the vertical or horizontal position Hardened steel rollers supporting the load run smoother and last longer than bearings.

3. VEVOR Chain Block 1.5T Ratchet Lever Block Chain Hoist Manual Lever Chain Hoist Come Along Chain Puller 10 Ft Lift (10ft)

Feature

Chain block max lift height: 10ft,Chain Length: 10ft
Chain hoist distance between hooks:14-3/8";Chain diameter: 5/16"
Length of lever chain hoist handle: 16" ;Lift capacity: 3000lbs
Lever block chain hoist material: 20Mn2 premium alloy steel, black oxide finish, heat treated
lever hoist ideal for portable use in workshops, garages, factories, etc

Description

3000lbs 10ft Ratcheting Lever Block Chain Hoist Come Along Puller Pulley

This 1.5 Ton lever chain hoist has load control with a mechanical brake, hardened steel hooks with latches

The chain hoist is ideal for warehouse, auto shops, construction site and more operating situations. It can safely lift heavy loads up to 1-1/2 ton and efficiently lift heavy objects to 10 feet above the ground. Built-in mechanical load brakes provide safety control when lifting loads. There are two swivel eye hooks with safety latches that provides solid grips, so as to ensure the lift and load safety. Built-in gearing can make the chain hoist easy to use. One-hand operation allows easy control of load. Super light structure with tough steel construction and compact design can be operated even in high or narrow places

The manual lever block chain are made of superior steel, which has the following characteristics in design

a.Safe, reliable and durable use

b.Excellent performance and minimum maintenance.

c.Small volume, light weight and portable size

d.Hand pull and high efficiency

e.Advanced structured attractive appearance

Item Specification:

Chain material: 20Mn2 premium alloy steel, black oxide finish, heat treated

Hook: Hardened, heat treated & forged steel. black oxide finish

Gear: Heat treated, forged & milling carbon steel

Cover: Cold rolled steel, yellow paint

Max lift height: 10ft

Chain diameter: 5/16"

Chain Length: 10ft

Lift capacity: 3000lbs

Packing size: 21"x8"x6"

Packing weight: 30.8lbs

Application:

This heavy duty chain hoist is perfect for lifting engine, machinery, tree limbs, and radio towers

Package Content

1 X 3000lbs 10ft Chain Block

1 X Puller pulley

1 X Gear

2 X Swivel Eye Hooks with Latches

4. Zorvo 1.5 Ton 3000lb Lift Lever Block Chain Hoist with Ratchet Lift 5 feet Chain Hoist Chain Hoist Lift Puller -Shipping from USA,3-7 Days Delivery

Feature

The chain hoist is ideal for warehouse, auto shops, construction site and more operating situations. Perfect for lifting engine, machinery, tree limbs, and radio towers.
It can safely liftheavy loads up to 1.5 ton and efficiently lift heavy objects to 5 feet above the ground.
Two swivel hook with safety latches , 0.27inch diameter chain thickness. All steel construction with a durable powder coat finish
Come with puller pulley, gear, and two swivel eye hooks with latches. Small volume, light weight and portable size. Easy to use and carry.
Shipping From USA ,3-7 days for delivery.

Description

Features:
1.Safe, reliable and durable use.
2.Excellent performance and minimum maintenance.
3.Small volume, light weight and portable size.
4.Hand pull and high efficiency.
5.Advanced structured attractive appearance.
6.5 feet/1.5m lift
7.Build-in mechanical load brake
8.Two swivel hook with safety latches
9.7.1mm diameter chain thickness
10.1.5 ton. lever block hoist chain ratchet type
11.Constructed with hardened alloy steel chains.
12.Come with puller pulley, gear, and two swivel eye hooks with latches Ideal for portable use in workshops, garages, factories, etc.

Specification
capacity:1.5t
standard lift:59inch
test load:1.5t
minmum distance between hooks:13.18inch
hand pull force in full loading:39.68lb
load chain dia:0.27inch

Package includes:
1*1.5t 5ft Chain Block
1*Puller pulley
1*Gear
2*Swivel Eye Hooks with Latches

5. Harrington LB Series Steel Lever Hoist, 9-19/32" Lever, 1 Ton Capacity, 15' Lift Height, 1.1" Opening, 11.8" Headroom

Feature

Get positive braking action with Weston-style load brake incorporating 2 moisture-resistant brake pads with four braking surfaces
Rugged, all-steel construction that actually weighs less than comparable aluminum models
Enjoy protection against dirt and moisture with a totally enclosed brake mechanism
Ensure long life with machined, heat-treated, split load double reduction gears
Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load; equipped with standard rubber grip for non-slip operation

Description

Harrington's LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. Rugged, all-steel construction that actually weighs less than comparable aluminum models. Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces. includes two brake pawls for additional reliability. Enjoy protection against dirt and moisture with a totally enclosed brake mechanism. Ensure long life with machined, heat-treated, split load double reduction gears. operate in close quarters with short steel handle and 15-degree recovery strokes. Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load. Equipped with standard rubber grip for non-slip operation. Grade 100 heat-treated load chain is nickel plated for corrosion resistance. Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. top and bottom hooks rotate 360 degrees. test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.21 requirements.

6. Harrington LB Series Steel Lever Hoist, 10.4" Lever, 2 Ton Capacity, 15' Lift Height, 1.4" Opening, 14.8" Headroom

Feature

Get positive braking action with Weston-style load brake incorporating 2 moisture-resistant brake pads with four braking surfaces
Rugged, all-steel construction that actually weighs less than comparable aluminum models
Enjoy protection against dirt and moisture with a totally enclosed brake mechanism
Ensure long life with machined, heat-treated, split load double reduction gears
Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load; equipped with standard rubber grip for non-slip operation

Description

Harrington's LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. Rugged, all-steel construction that actually weighs less than comparable aluminum models. Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces. includes two brake pawls for additional reliability. Enjoy protection against dirt and moisture with a totally enclosed brake mechanism. Ensure long life with machined, heat-treated, split load double reduction gears. operate in close quarters with short steel handle and 15-degree recovery strokes. Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load. Equipped with standard rubber grip for non-slip operation. Grade 100 heat-treated load chain is nickel plated for corrosion resistance. Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. top and bottom hooks rotate 360 degrees. test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.21 requirements.

7. Harrington LB Series Steel Lever Hoist, 9-19/32" Lever, 3/4 Ton Capacity, 15' Lift Height, 0.9" Opening, 11" Headroom

Feature

Get positive braking action with Weston-style load brake incorporating 2 moisture-resistant brake pads with four braking surfaces
Rugged, all-steel construction that actually weighs less than comparable aluminum models
Enjoy protection against dirt and moisture with a totally enclosed brake mechanism
Ensure long life with machined, heat-treated, split load double reduction gears
Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load

Description

Harrington's LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. Rugged, all-steel construction that actually weighs less than comparable aluminum models. Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces. includes two brake pawls for additional reliability. Enjoy protection against dirt and moisture with a totally enclosed brake mechanism. Ensure long life with machined, heat-treated, split load double reduction gears. operate in close quarters with short steel handle and 15-degree recovery strokes. Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load. Equipped with standard rubber grip for non-slip operation. Grade 100 heat-treated load chain is nickel plated for corrosion resistance. Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. top and bottom hooks rotate 360 degrees. test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.21 requirements.

8. Harrington LB Series Steel Lever Hoist, 10.4" Lever, 2 Ton Capacity, 5' Lift Height, 1.4" Opening, 14.8" Headroom

Feature

Get positive braking action with Weston-style load brake incorporating 2 moisture-resistant brake pads with four braking surfaces
Rugged, all-steel construction that actually weighs less than comparable aluminum models
Enjoy protection against dirt and moisture with a totally enclosed brake mechanism
Ensure long life with machined, heat-treated, split load double reduction gears
Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load; equipped with standard rubber grip for non-slip operation

Description

Harrington's LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. Rugged, all-steel construction that actually weighs less than comparable aluminum models. Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces. includes two brake pawls for additional reliability. Enjoy protection against dirt and moisture with a totally enclosed brake mechanism. Ensure long life with machined, heat-treated, split load double reduction gears. operate in close quarters with short steel handle and 15-degree recovery strokes. Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load. Equipped with standard rubber grip for non-slip operation. Grade 100 heat-treated load chain is nickel plated for corrosion resistance. Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. top and bottom hooks rotate 360 degrees. test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.21 requirements.

9. TOHO HSH-616 OP Lever Block/Ratchet Puller Hoist with Overload Protection (1.5 Ton, 20 Foot Chain)

Feature

Comformity - ANSI B30.16, AS1418.2, EN13157 Warranty - Three Years
Test - Each piece pass proof load test at 150% of rated load.
Overload Protection-All the hoist are factory setted with overload protection system
Available in 3/4 Ton, 1.5 Ton and 3 Ton Capacity with 5ft, 10ft. and 20ft lift chain length
Safety - All the hoist has a 4:1 safety factor PLI available - Products liability insurance available for all the hoist

Description

HSH-616 Lever Block Hoist with German Technology features Overload protection and meets all international standards such as GS,CE,EN,ANSI,AS/NZS1418.2. All steel construction for external impact resistance. High-stringth, cold-forged, alloy steel contruction for lighter weight impact resistance with long life. 360 degree rotating handle with short stroke to ratchet loads. Durable powder coated finish to prevent corrosion. Reliable non-asbestos disk braking system to prevent accidents. Single-hand free chaining is simple and convenient, allowing smooth, trouble-free operation in the vertical or horizontal position Hardened steel rollers supporting the load run smoother and last longer than bearings.

10. Hd 2 Ton Ratcheting Lever Hoist Hand Puller Come Along 2 Hooks Cable Dual Gear

Feature

COME ALONG WITH HEAVY DUTY GEAR
NEW AND IMPROVED LARGER HANDLE FOR EXTRA LEVERAGE
THICK BODY FRAME
HEAVY DUTY CABLE WITH STRONG ALLOY HOOKS

Description

2 TON HOIST COME ALONG 2 HOOKS 7.5 FEET WIRE CABLE

COME ALONG WITH HEAVY DUTY GEAR
NEW AND IMPROVED LARGER HANDLE FOR EXTRA LEVERAGE
THICK BODY FRAME
HEAVY DUTY CABLE WITH STRONG ALLOY HOOKS
STRONG DROP FORGED STEEL SLIP HOOKS
FOR USE IN VERSATILE APPLICATIONS
CONSTRUCTION, AUTOMOTIVE FARM RANCH, WORK SHOP, HOME
IMPROVEMENT.
FENCING
VEHICLE RECOVERY

Conclusion

All above are our suggestions for lever hoist 2 ton. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using lever hoist 2 ton with us by comment in this post. Thank you!

You Might Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *